How To Install Window Blinds In Dallas

Numerous Dallas residents choose window blinds when they want more privacy and control over daylight in their properties. They’re a practical and cost-effective window treatment. They also need just a handful of steps to install for skilled do-it-yourselfers. However, nothing is more convenient than hiring a professional window treatment installer. Here are the basics of installing window blinds and when you ought to call the pros to handle it for you.

Take Precise Measurements

Prior to beginning, decide if you should get outside-mount or inside-mount blinds. This vital decision will tell you where to measure. Measure the depth, height, and width inside your window frame for inside-mount installations. When attaching outside-mount blinds, measure the height and width of your window, which includes the trim, and add three inches to every measurement to make sure you have adequate coverage. Measure precisely–refrain from rounding up or down. Ill-fitting blinds will fail to function smoothly.

Choose Your Blinds

Once you have your measurements, you can find your blinds. You might already know what type of blinds you wish to have. Buy blinds that are as near to your measurements as possible. Ready-made blinds may not fit precisely, either sticking out too much or not getting to the edge of the window entirely. Be sure to get hardware that let you hang the blinds at the appropriate depth, too. You should order specially made blinds for the best fit.

Install Your Window Blinds

Your blinds might come with instructions. Follow them to install your specific product. If you would like a glimpse of how hard it is to install window blinds in Dallas, here are several general steps to provide a better idea.

 

Inside Mount Blinds

 

1. Place a bracket on the top of the window’s frame around one inch from the edge. Ensure this positioning won’t interfere with the blind’s function. Utilize a pencil to indicate the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Align the bracket holes with your pilot holes and secure with screws.
4. Redo the initial three steps for the next bracket.
5. Pop the end caps onto the top rail of your blinds. Slide the rail into the brackets.

Attach the tilt wand and check it. Additionally, try out the pull cord.

Outside Mount Blinds

1. Figure out if you’re installing on the window trim or wall around the window. Grasp the headrail and make certain the blind reaches the lower edges of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from your headrail marks and mark your bracket holes here.
4. Drill pilot holes in the proper spots.
5. Situate the brackets with the pilot holes and secure with screws.
6. Slide the headrail into the brackets.

Attach the tilt wand and try out everything to ensure it works.

Opt For The Easiest Way To Install Blinds 

Of course, you aren’t required to put up blinds yourself. The easiest way to install window blinds in Dallas is to seek out a professional window treatment installer. They will work with you at every step. They’ll help you find blinds that meet your needs and preferences, make accurate measurements for a custom product, and install them for you. They do this each day, so they’ll handle your job swiftly and precisely. They’ll be able to remedy any challenges without taking hours trying to find help online. A window treatment expert will also provide a higher quality of blinds than box stores or online resellers.

Avoid The Trouble And Hire Sunburst Shutters To Install Your Window Blinds In Dallas

Installing window blinds in Dallas couldn’t be easier when you consult with Sunburst Shutters Dallas. We’ll help you choose made-to-order blinds that will fit your windows precisely, and our expert installation staff will attach them for you. All you need to do is dial 214-301-5066 or submit the form on this page to schedule a free in-home consultation.